Best LIDAR Sensor DJI in 2025
Updated on July 2025
#1
Recommended
17% Off
Free Shipping
- LiDAR focusing system simplifies hand-held shooting in low-light conditions, enhancing focus capabilities.
- LiDAR Range Finder (RS) features 43,200 ranging points with a detection range of 14 meters, incorporates a built-in 30mm equivalent camera with a 70° field of view.
- Supports autofocus on manual lenses after calibration, optimizing performance in various shooting scenarios.
- Includes LiDAR Range Finder (RS), Multi-Camera Control Cable (USB-C, 30 cm), and LiDAR Control Cable (USB-C, 30 cm).
- Compatible with DJI RS 4 Pro and DJI RS 3 Pro.
Read More
- LiDAR focusing system simplifies hand-held shooting in low-light conditions, enhancing focus capabilities.
- LiDAR Range Finder (RS) features 43,200 ranging points with a detection range of 14 meters, incorporates a built-in 30mm equivalent camera with a 70° field of view.
- Supports autofocus on manual lenses after calibration, optimizing performance in various shooting scenarios.
Read More
#2
Value for Money
12% Off
Free Shipping
- Includes four cables for connecting DJI LiDAR Range Finder, DJI Video Transmitter, DJI RS Focus Motor (2022), and a power supply.
- Compatible with DJI RS 4 Pro and DJI RS 3 Pro.
- Enables a complete focusing and monitoring system for various cameras and manual lenses, allowing for lens calibration and autofocus.
- Facilitates inter-connection among DJI RS 3 Pro/DJI RS 4 Pro, DJI Transmission, and LiDAR Range Finder (RS) through USB-C for stabilization and remote control.
- Requires a 12-17 V external power supply for optimal performance.
Read More
- Includes four cables for connecting DJI LiDAR Range Finder, DJI Video Transmitter, DJI RS Focus Motor (2022), and a power supply.
- Compatible with DJI RS 4 Pro and DJI RS 3 Pro.
- Enables a complete focusing and monitoring system for various cameras and manual lenses, allowing for lens calibration and autofocus.
- Facilitates inter-connection among DJI RS 3 Pro/DJI RS 4 Pro, DJI Transmission, and LiDAR Range Finder (RS) through USB-C for stabilization and remote control.
Read More
#3
Free Shipping
- M12 12-pin cable compatible with DJI Livox LiDAR sensors and various robotics applications
- 1.5 meter M12 aviation connector cable for power, Ethernet, and quick verification of Livox products
- M12 12-pin A-code female connector with RJ45 Ethernet, 2-wire power, and 5-wire function cables, featuring gold-plated contacts and waterproof design
- Power cable for external DC supply; Ethernet cable for data transmission to computer; function cable for GPS time synchronization
- 1-to-3 splitter cable for Livox aviation connector
Read More
- M12 12-pin cable compatible with DJI Livox LiDAR sensors and various robotics applications
- 1.5 meter M12 aviation connector cable for power, Ethernet, and quick verification of Livox products
- M12 12-pin A-code female connector with RJ45 Ethernet, 2-wire power, and 5-wire function cables, featuring gold-plated contacts and waterproof design
Read More
#4
Free Shipping
- Model: TF-Luna with an operating range of 0.2-8m and a distance resolution of 1cm.
- Low power consumption of 0.35W and frame rates between 1-250Hz, operating frequency at 100Hz.
- Lightweight design, weighing less than 5g, with a communication interface via UART/I2C and a 5V power supply.
- Compatible with devices such as Raspberry Pi Pico, Pixhawk, and WiFi_Lora_32 0.96" OLED module.
- Ideal for applications including short distance obstacle avoidance, auxiliary focus, and intrusion detection.
Read More
- Model: TF-Luna with an operating range of 0.2-8m and a distance resolution of 1cm.
- Low power consumption of 0.35W and frame rates between 1-250Hz, operating frequency at 100Hz.
- Lightweight design, weighing less than 5g, with a communication interface via UART/I2C and a 5V power supply.
- Compatible with devices such as Raspberry Pi Pico, Pixhawk, and WiFi_Lora_32 0.96" OLED module.
Read More
#5
Free Shipping
- Specifically designed for DJI Focus Pro LiDAR and Motor.
- Includes three 1/4" threaded holes for customizable height adjustments of the 15 mm rod.
- Offers vertical rod adjustment up to 150 mm and horizontal adjustment up to 58 mm.
- Mounts securely using two M3 screws for the LiDAR and features two 1/4" screw points for camera attachment.
- Can also be used to mount a monitor via a 1/4" screw when not using the LiDAR.
Read More
- Specifically designed for DJI Focus Pro LiDAR and Motor.
- Includes three 1/4" threaded holes for customizable height adjustments of the 15 mm rod.
- Offers vertical rod adjustment up to 150 mm and horizontal adjustment up to 58 mm.
- Mounts securely using two M3 screws for the LiDAR and features two 1/4" screw points for camera attachment.
Read More
#6
10% Off
Free Shipping
- Upgraded Lidar Module: The TFmini-s features a shortened dead zone of 10 cm and enhanced outdoor accuracy across various reflectances.
- Compact Design: This module offers low power consumption with a 1cm distance resolution and a 100Hz frame rate, operating effectively in up to 70Klux ambient light.
- High-Performance Measurement: Utilizing Time of Flight (ToF) technology, it delivers stable and precise distance detection with high sensitivity.
- Versatile Applications: Ideal for pedestrian and vehicle detection, as well as for use in intelligent barrier gates and altimetry.
- Compatibility Note: The TFmini-s operates with UART by default, but can be switched to I2C for compatibility with Raspberry Pi and Arduino.
- Documentation Access: User manual and additional documents available through the provided product links.
Read More
- Upgraded Lidar Module: The TFmini-s features a shortened dead zone of 10 cm and enhanced outdoor accuracy across various reflectances.
- Compact Design: This module offers low power consumption with a 1cm distance resolution and a 100Hz frame rate, operating effectively in up to 70Klux ambient light.
- High-Performance Measurement: Utilizing Time of Flight (ToF) technology, it delivers stable and precise distance detection with high sensitivity.
Read More
#7
Free Shipping
- Includes TTL to USB adapter and cable for easy connection with MCU development boards.
- Single-point ranging LiDAR utilizing TOF technology for stable and accurate distance measurement.
- Low-cost LiDAR module with a 0.2-8m measurement range, suitable for use with Pixhawk and Raspberry Pi for obstacle avoidance in drones and robots.
- Ideal for applications in autonomous vehicles, drones, smart home robotics, and logistics management.
- Package contains TF-Luna, TTL to USB adapter, and 6PIN 1.25 to 2.54 Dupont Line.
Read More
- Includes TTL to USB adapter and cable for easy connection with MCU development boards.
- Single-point ranging LiDAR utilizing TOF technology for stable and accurate distance measurement.
- Low-cost LiDAR module with a 0.2-8m measurement range, suitable for use with Pixhawk and Raspberry Pi for obstacle avoidance in drones and robots.
Read More
#8
Free Shipping
- Tailored design for DJI Focus Pro LiDAR and Motor
- Adjustable height with a 1/4" screw slot on NATO rail for 15 mm rod
- Vertical adjustment of 108 mm and horizontal adjustment of 63 mm
- Secures DJI Focus Pro LiDAR with two M3 screws; attaches to camera cage with two 1/4" screws
- Supports monitor mounting via a 1/4" screw when not using Focus Pro LiDAR
Read More
- Tailored design for DJI Focus Pro LiDAR and Motor
- Adjustable height with a 1/4" screw slot on NATO rail for 15 mm rod
- Vertical adjustment of 108 mm and horizontal adjustment of 63 mm
- Secures DJI Focus Pro LiDAR with two M3 screws; attaches to camera cage with two 1/4" screws
- Supports monitor mounting via a 1/4" screw when not using Focus Pro LiDAR
#9
Free Shipping
- The TFS20-L LiDAR sensor employs dToF technology for accurate distance measurements, achieving a precision of ±6cm and a ranging capability of 2cm.
- Measuring 21*15*7.87mm³ and weighing only 1.35g, this sensor is ideal for compact installations.
- It can detect distances up to 20 meters, featuring strong anti-glare abilities for use in various lighting conditions.
- Suitable for altitude hold and assisted landing in consumer drones, as well as fall prevention in service robots.
- Designed for continuous operation with an average power consumption of ≤0.35W, ensuring efficiency over extended use.
Read More
- The TFS20-L LiDAR sensor employs dToF technology for accurate distance measurements, achieving a precision of ±6cm and a ranging capability of 2cm.
- Measuring 21*15*7.87mm³ and weighing only 1.35g, this sensor is ideal for compact installations.
- It can detect distances up to 20 meters, featuring strong anti-glare abilities for use in various lighting conditions.
- Suitable for altitude hold and assisted landing in consumer drones, as well as fall prevention in service robots.
Read More
#10
5% Off
Free Shipping
- The FHL-LD19 LiDAR Kit utilizes time-of-flight technology for precise distance measurement within a 12m range, achieving an average accuracy of ±45mm.
- Resistant to bright light conditions up to 30K lux, ensuring reliable performance for both indoor and outdoor mapping.
- Offers 360-degree silent scanning and a lifespan of up to 10,000 cycles, powered by a brushless motor.
- Compact and lightweight design at 54*46*35mm and under 50g, making it easy to integrate into various systems.
- Compatible with ROS/ROS2/C/C++ SDK, with tutorials available for Raspberry Pi, suitable for integration into robots and drones for diverse applications.
Read More
- The FHL-LD19 LiDAR Kit utilizes time-of-flight technology for precise distance measurement within a 12m range, achieving an average accuracy of ±45mm.
- Resistant to bright light conditions up to 30K lux, ensuring reliable performance for both indoor and outdoor mapping.
- Offers 360-degree silent scanning and a lifespan of up to 10,000 cycles, powered by a brushless motor.
- Compact and lightweight design at 54*46*35mm and under 50g, making it easy to integrate into various systems.
Read More
Red Komodo 6k Camera Monitor
See All
Dji Mavic Mini 3 Pro Replacement Gimbal
See All
2 Pack 20ft Power Extension Cable Compatible With Wyze Cam
See All
